Blog | November 2013 | Create a Card Project in Under 10 Minutes with Neroli Create a Card Project in Under 10 Minutes with Neroli What you will need Dovecraft 5x 7 Kraft card First Edition Neroli 8x8 PadFirst Edition Neroli Embellishment Box Dovecraft Wooden Stamps Lillibet Lace Ribbon Dovecraft Foam Squares Dovecraft Ultimate Glue Dovecraft Double-sided Glue First Edition Neroli Embellishment Kit FEEMB004Instructions1. Use a corner punch to remove the corners of the Kraft card.2. Cut a 7x4cm piece of red card from the Neroli paper pad and a 4x3 piece of white card, stamp your sentiment on the white card, when dry mount it to the red card using foam squares. 3. Wrap a length of green twine around the card four times and finish by tying with a bow, positioned 1/3 of the way down the card, mount the sentiment over the twine, in the bottom right corner4. Cut a strip of lace ribbon the height of the card and stick down the left hand side of the card using double-sided tape. Finish the card by gluing down a variety of embellishments, evenly spaced, layer the embellishments for added interest. And there you have a simple but stunning card that can be used for a number of occasions. Share your thoughts on this project below.
What you will need Dovecraft 5x 7 Kraft card First Edition Neroli 8x8 PadFirst Edition Neroli Embellishment Box Dovecraft Wooden Stamps Lillibet Lace Ribbon Dovecraft Foam Squares Dovecraft Ultimate Glue Dovecraft Double-sided Glue First Edition Neroli Embellishment Kit FEEMB004Instructions1. Use a corner punch to remove the corners of the Kraft card.2. Cut a 7x4cm piece of red card from the Neroli paper pad and a 4x3 piece of white card, stamp your sentiment on the white card, when dry mount it to the red card using foam squares. 3. Wrap a length of green twine around the card four times and finish by tying with a bow, positioned 1/3 of the way down the card, mount the sentiment over the twine, in the bottom right corner4. Cut a strip of lace ribbon the height of the card and stick down the left hand side of the card using double-sided tape. Finish the card by gluing down a variety of embellishments, evenly spaced, layer the embellishments for added interest. And there you have a simple but stunning card that can be used for a number of occasions. Share your thoughts on this project below.